<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for a down conversion application with a +26 dBm sine wave LO input.  

Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C. All bare die are 100% DC tested and visually inspected.

Parameter

Test Conditions

Min

Typical

Max

Units

RF Port Frequency Range

 

2

 

18

GHz

LO Port Frequency Range

 

2

 

18

I Port Frequency Range

 

0

 

3

Q Port Frequency Range

 

0

 

3

Single Sided Conversion Loss (CL)

RF/LO = 2 - 18 GHz

I/Q = DC - 0.2 GHz

 

10

15

dB

RF/LO = 2 - 18 GHz

I/Q = 0.2 - 3 GHz

 

12

 

Image Reject/Single Sideband Conversion Loss (CL)

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

7.5

 

Noise Figure (NF)[1]

RF/LO = 2 - 18 GHz

I/Q = DC – 0.2 GHz

 

10

 

dB

Image Rejection (IR)[2]

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

35

 

dBc

Amplitude Balance

RF/LO = 2 - 18 GHz

I/Q = 0.091 GHz

 

0.25

2

dB

Phase Balance

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

1

11

°

Isolation

LO to RF

RF/LO = 2 - 18 GHz

 

53

 

dB

LO to IF

IF/LO = 2 - 18 GHz

 

26.5

 

RF to IF

RF/IF = 2 - 18 GHz

 

36

 

Input IP3 (IIP3)

Image Reject Downconversion

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

27

 

dBm

I/Q Downconversion

RF/LO = 2 - 18 GHz

I = 0.091 GHz

 

24.5

 

Single Sideband Upconversion

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

26

 

I/Q Upconversion

 

RF/LO = 2 - 18 GHz

I/Q = 0.091 GHz

 

24

 

Input 1 dB Gain Compression Point (P1dB)

I/Q Upconversion

RF/LO = 2 - 18 GHz

I/Q = 0.091 GHz

 

10

 

dBm

Combined Upconversion

RF/LO = 2 - 18 GHz

IF = 0.091 GHz

 

13

 

Downconversion

RF/LO = 2 - 18 GHz

I/Q/IF = 0.091 GHz

 

13

 



[1] Mixer Noise Figure given for single sided I/Q conversion typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz. Image reject downconversion will show noise figure improvements in the presence of image noise.

[2] Image Rejection and Single sideband performance plots are defined by the upper sideband (USB) or lower sideband (LSB) with respect to the LO signal. Plots are defined by which sideband is selected by the external IF quadrature hybrid.

Download our 3D models here.
MMIQ-0218HSM Mixer Package Diagram

The MMIQ-0218HSM is a broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz. Excellent phase and amplitude balance of the on-chip LO quadrature hybrid leads to typical image rejection of 35 dB. This is the higher LO drive/higher linearity version of the popular MMIQ-0218LSM. Surface mount QFNs and evaluation boards are available.

ModelPackageOrder
MMIQ-0218HSM-2Surface Mount (SM)Buy Now
EVAL-MMIQ-0218HEval BoardBuy Now


Our engineers paired each mixer with its ideal LO driver amp – Complete List

Nonlinear device models for ADS and Microwave Office – Download the PDK

Find the right mixer for your frequency plan – Mixer Search Tool

Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.