Amplifiers

by Robert Maurer AMM-6702UC5 offers positive only, +5V operation of the AMM-6702UC amplifier Supply voltage suppression of 100 dB The voltage rectifier circuit and BoM are shown below so [...]

by Jacob Trevithick Phase noise is critical to systems, like Electronic Warfare and 5G Communications, requiring precise frequency stability. Oscillators are typically the determining factor in [...]

Modern battlefields are awash in electronic signals from radars, jammers, and radio communications. Therefore, high linearity EW receivers for applications such as Radar Warning Receivers, [...]

Maximum power handling is a common concern of our customers. Nothing is worse than plugging in an expensive device only for it to be immediately destroyed. Understanding power handling is [...]

This is a (virtually) math-free introduction to microwave amplifiers from an applications standpoint. There are many references available for the aspiring amplifier designer; this series of posts [...]

Frequency multipliers are used to generate higher harmonics from an input sinusoid.  In particular, the job of the doubler is to output only the 2nd harmonic.  Invariably, the fundamental tone [...]

We sell a large product line of packaged amplifiers, primarily for use as LO buffer amplifiers, but that can also be used as general purpose gain blocks. While we don’t design the actual [...]