<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

Specifications

The electrical specifications apply at TA=+25 °C in a 50 Ω system.

QFNs are 100% RF tested.

Parameter

Test Conditions

Frequency

Min

Typical

Units

Output P7dB[1]

8 V/7 V bias

10 MHz – 20 GHz

+22

+26

dBm

Small Signal Gain

8 V/7 V bias,

-20 dBm Input Power

10 MHz – 20 GHz

+12

+14

dB

Input Return Loss

10 MHz – 20 GHz

 

8

Output Return Loss

10 MHz – 20 GHz

 

12

Noise Figure

 

10 MHz – 20 GHz

 

6

Reverse Isolation

 

10 MHz – 20 GHz

 

28

Collector Current[2], Ic

8 V/6 V

-

 

53

mA

8 V/7 V

-

72

Current Mirror Current, Ib

8 V/6 V

-

 

3.4

8 V/7 V

-

4.2

Input IP3 (IIP3)

8 V/7 V bias,

-12 dBm Input Power

 

10 MHz – 20 GHz

 

+13

dBm

Output IP3 (OIP3)

10 MHz – 20 GHz

 

+27

Output P1dB

8 V/7 V bias

10 MHz – 20 GHz

 

 

Input Power for Saturation

8 V/7 V bias

10 MHz – 20 GHz

 

+15

dBm

Phase Noise @ 10 kHz Offset

8 V/7 V bias,

+10 dBm Input power

 

1 GHz

 

-167

dBc/Hz

[1] Saturated output power measurements taken using +8 dBm input power applied to an EVAL-APM-7099SM amplifier stage as a driver for the EVAL-APM-7099SM DUT

[2] Bias conditions for Ic and Ib tested with no RF input power.  See section 3.6 for DC current vs. RF power.  Bias conditions presented as VC/VB.

Packages

Download our 3D models here.
APM-7099SM Amplifier Package Diagram
APM-7099SM 0.01-20 GHz Surface Mount Low Phase Noise Amplifier

The APM-7099SM is a broadband low phase noise driver amplifier designed to provide a saturated +25 dBm output power with low DC
power consumption. This amplifier uses GaAs HBT technology for low phase noise, and is optimized to drive our NLTL multiplier line. It can also provide enough power to drive the LO port of an S-diode mixer from 10 MHz to 15 GHz, or of an H or L-diode mixer from 10 MHz to 20 GHz. This amplifier can be operated with a variety of bias conditions for both low and high-power applications. The APM-7099SM is packaged in a compact 4mm QFN for surface mount integration on circuit board-based systems.

ModelPackageOrder
APM-7099SM4x4 mm Surface MountBuy Now
EVAL-APM-7099SMConnectorized Evaluation Fixture (EVAL)Buy Now


Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.