<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

The electrical specifications apply at TA=+25 °C in a 50 Ω system.

QFNs are 100% RF tested.

Parameter

Test Conditions

Frequency

Min

Typical

Units

Saturated Output Power[1]

8 V/7 V bias

100 MHz – 22 GHz

+19

+23

dBm

Small Signal Gain

8 V/7 V bias,

-25 dBm Input Power

100 MHz – 22 GHz

+13

+15

dB

Input Return Loss

100 MHz – 22 GHz

 

11

Output Return Loss

100 MHz – 22 GHz

 

10

Noise Figure

 

100 MHz – 22 GHz

 

4.8

Reverse Isolation

 

100 MHz – 22 GHz

 

30

Collector Current[2], Ic

8 V/6 V

-

 

33

mA

8 V/7 V

-

42

Current Mirror Current, Ib

8 V/6 V

-

 

3

8 V/7 V

-

4

Input IP3 (IIP3)

8 V/7 V bias,

-20 dBm Input Power

 

100 MHz – 22 GHz

 

+8

dBm

Output IP3 (OIP3)

100 MHz – 22 GHz

 

+22

Output P1dB

8 V/7 V bias

100 MHz – 22 GHz

 

+19

Input Power for Saturation

8 V/7 V bias

100 MHz – 22 GHz

 

+10

dBm

Phase Noise @ 10 kHz Offset

8 V/7 V bias,

+10 dBm Input power

 

1 GHz

 

-165

dBc/Hz



[1] Saturated output power specification defined using the EVAL-APM-7098SM P7dB compression curve shown in section 3.6

[2] Bias conditions for Ic and Ib tested with no RF input power.  See section 3.6 for DC current vs. RF power.  Bias conditions presented as VC/VB.

Download our 3D models here.
APM-7098SM Amplifier Package Diagram

The APM-7098SM is a broadband low phase noise LO driver amplifier designed to provide a saturated +23 dBm output power with low DC power consumption. This amplifier uses GaAs HBT technology for low phase noise, and is optimized to provide enough power to drive the LO port of an S-diode mixer from 100 MHz to 18 GHz or of an H or L-diode mixer from 100 MHz to 22 GHz. This amplifier can be operated with a variety of bias conditions for both low and high-power applications. The APM-7098SM is packaged in a compact 4 mm QFN for surface mount integration on circuit board-based systems.

ModelPackageOrder
APM-7098SM4x4 mm Surface MountBuy Now
EVAL-APM-7098SMConnectorized Evaluation Fixture (EVAL)Buy Now


Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.