<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

Specifications

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for the connectorized S package mixer used in the forward direction with a +23 dBm sine wave input using an ADM3-0022PA-H up to 25GHz and a saturated AMM-6702UC above 25GHz[1]. Specifications shown for configuration A (B). Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C. All bare die are 100% DC tested and visually inspected.

Parameter

Test Conditions

Min

Typical

Max

Units

RF (Port 3) Frequency Range

 

3

 

30

GHz

LO (Port 1) Frequency Range

 

3

 

30

I (Port 2) Frequency Range

 

0

 

5

Conversion Loss (CL)[2]

RF/LO = 3 - 30 GHz

I = DC - 0.2 GHz

 

7

(9)

15

(15)

dB

RF/LO = 3 – 30 GHz

I = 0.2 – 5 GHz

 

9

(11)

 

 

Noise Figure (NF)[3]

RF/LO = 3 - 30 GHz

I = DC - 0.2 GHz

 

7.5

 

dB

Isolation

LO to RF

RF/LO = 3 - 30 GHz

 

50

 

dB

LO to IF

IF/LO = 3 - 30 GHz

 

40

 

RF to IF

RF/IF = 3 - 30 GHz

 

40

 

Input IP3 (IIP3)

RF/LO = 3 - 30 GHz

I = DC - 0.2 GHz

 

+32

(+32)

 

dBm

Input 1 dB Gain Compression Point (P1dB)

 

 

+15

(+15)

 

dBm

[1] Saturated AMM-6702UC bias conditions are always +4V/-0.4V.  Input power to the amplifier is a +10dBm sine wave input unless otherwise stated

[2] Measured as a down converter to a fixed 91MHz IF.

[3] Mixer Noise Figure typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz.

Packages

Download our 3D models here.
MM1-0330T Mixer Package Diagram
MM1-0330T GaAs MMIC Double Balanced Mixer

MM1-0330T is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth.  The MM1-0330T works well as both an up and down converter through the K band and beyond. The MM1-0330T is recommended for frequency conversion applications that require high linearity.  It is available as both wire bondable die and as a connectorized module. For a list of recommended LO driver amps for all mixers and IQ mixers, see here.

ModelPackage StyleOrder
MM1-0330TSConnectorized (S)Buy Now
MM1-0330TCH-2Chip (CH)Buy Now


Our engineers paired each mixer with its ideal LO driver amp – Complete List

Nonlinear device models for ADS and Microwave Office – Download the PDK

Find the right mixer for your frequency plan – Mixer Search Tool

Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.