<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

Specifications

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for a down conversion application with a sine wave LO input.[1]  

Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C. All bare die are 100% DC tested and visually inspected.

Parameter

Test Conditions

Min

Typical

Max

Units

RF (Port 1) Frequency Range

 

40

 

100

GHz

LO (Port 2) Frequency Range

 

40

 

100

I (Port 3) Frequency Range

 

0

 

20

Q (Port 4) Frequency Range

 

0

 

20

Single Sided Conversion Loss (CL)[2]

RF/LO = 40 - 100 GHz

I = DC - 0.2 GHz

 

12

 

dB

Image Reject/Single Sideband Conversion Loss (CL)

RF/LO = 40 - 100 GHz

I+Q = DC - 0.2 GHz

 

10

 

 

Noise Figure (NF)[3]

RF/LO = 40 - 100 GHz

I+Q = DC – 0.2 GHz

 

10

 

dB

Image Rejection (IR)[4]

RF/LO = 40 - 100 GHz

I+Q = DC – 0.2 GHz

 

30

 

dBc

[1] LO power used for characterization varies by band. Saturated amplifiers used were AMM-6702, and A-3567

[2] Measured as an I/Q down converter (i.e., I and Q powers are not combined)

[3] Mixer Noise Figure typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz.

[4] Image Rejection and Single sideband performance plots are defined by the upper sideband (USB) or lower sideband (LSB) with respect to the LO signal. Plots are defined by which sideband is selected by the external IF quadrature hybrid.

Packages

Download our 3D models here.
MMIQ-40100H Mixer Package Diagram
MMIQ-40100H GaAs MMIC mmWave IQ Mixer

The MMIQ-40100H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 40 to 100 GHz on the RF and LO ports with an IF from DC to 20 GHz. With a typical image rejection of 30dB from the V through W band, this mixer is an ideal candidate for mmWave I/Q frequency conversion. Both wire bondable die and connectorized modules are available.

ModelPackageOrder
MMIQ-40100HCH-2Bare Die (CH)Buy Now
MMIQ-40100HMConnectorized (M)Buy Now


Our engineers paired each mixer with its ideal LO driver amp – Complete List

Nonlinear device models for ADS and Microwave Office – Download the PDK

Find the right mixer for your frequency plan – Mixer Search Tool

Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.