<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

Specifications

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for a down conversion application with a +18dBm sine wave LO input.  

Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C. All bare die are 100% DC tested and visually inspected.

Parameter

Test Conditions

Min

Typical

Max

Units

RF (Port 4) Frequency Range

 

18

 

65

GHz

LO (Port 1) Frequency Range

 

18

 

65

I (Port 3) Frequency Range

 

0

 

23

Q (Port 2) Frequency Range

 

0

 

23

Conversion Loss (CL)[1]

RF/LO = 18 - 65 GHz

I = DC – 0.2 GHz

 

11

 

dB

RF/LO = 18 - 65 GHz

I = 0.2 - 23 GHz

 

12

 

RF/LO = 18 - 65 GHz

Q = DC -0.2 GHz

 

11

 

RF/LO = 18 - 65 GHz

Q = 0.2 - 23 GHz

 

12

 

Noise Figure (NF)[2]

RF/LO = 18 - 65 GHz

I = DC – 0.2 GHz

 

11

 

dB

RF/LO = 18 - 65 GHz

Q = DC – 0.2 GHz

 

12

 

Image Rejection (IR)[3]

RF/LO = 18 - 65 GHz

I+Q = DC – 0.2 GHz

 

35

 

dBc

Isolation

LO to RF

RF/LO = 18-65 GHz

 

48

 

dB

LO to I

IF/LO = 18-65 GHz

 

42

 

LO to Q

IF/LO = 18-65 GHz

 

32

 

RF to I

RF/IF = 18-65 GHz

 

50

 

RF to Q

RF/IF = 18-65 GHz

 

56

 

 

Input IP3 (IIP3)[4]

I+Q

RF/LO = 18 - 65 GHz

I = DC – 0.2 GHz

 

21

 

dBm

[1] Measured as an I/Q down converter. (i.e., I and Q powers are not combined)

[2] Mixer Noise Figure typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz.

[3] Image Rejection and Single sideband performance plots are defined by the upper sideband (USB) or lower sideband (LSB) with respect to the LO signal. Plots are defined by which sideband is selected by the external IF quadrature hybrid.

[4] Typical IIP3 measured with I and Q ports combined with an external quadrature hybrid coupler.

[5] Vector Modulator measured with +30mA DC current applied to the I and Q ports.

Packages

Download our 3D models here.
MMIQ-1865H Mixer Package Diagram
MMIQ-1865H Passive GaAs MMIC IQ Mixer

The MMIQ-1865H is a high linearity, passive MMIC IQ mixer. This is an ultra-broadband mixer spanning 18 to 65 GHz on the RF and LO ports with an IF from DC to 23 GHz. Up to 35 dB of image rejection is available due to the excellent phase and amplitude balance of its on-chip LO quadrature hybrid. Both wire bondable die and connectorized modules are available.

ModelPackageOrder
MMIQ-1865HCH-2Bare Die (CH)Buy Now
MMIQ-1865HUBConnectorized (UB)Buy Now


Our engineers paired each mixer with its ideal LO driver amp – Complete List

Nonlinear device models for ADS and Microwave Office – Download the PDK

Find the right mixer for your frequency plan – Mixer Search Tool

Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.