5G & mmWave

Marki’s mmWave Advantage

• Cutting-edge MMIC products up to 125GHz
• Multi-octave bandwidth to support multiple bands
• World-leading high linearity mixers for maximum SFDR
• Multiple packaging options
• Trusted supplier to all major test equipment manufacturers
• Steep volume discounts for surface mount & bare die MMICs

Download our 2021 5G & mmWave Catalog

The marketplace is full of narrowband components that only target specific applications such as SATCOM, wireless point-to-point, or perhaps just one of the 5G bands; and they may only be available with inconvenient waveguide interfaces. However, at Marki Microwave we design our components to maintain the highest performance over extremely wide bandwidths, often supporting all proposed 5G and millimeter wave bands in single devices. We have a wide selection of bare die, surface mount, and coaxial-connectorized solutions to support all of your millimeter-wave design and testing needs.
5G networks are ushering in a new era of connectivity, providing unprecedented capacity and data rates by utilizing the latest waveform modulation and antenna beamforming techniques. Currently the 28GHz and 39GHz bands provide the necessary bandwidth to make this all possible. Meanwhile bands from 40 GHz to 71 GHz, with bandwidths as wide as 14GHz, are currently being discussed. This is in stark contrast to the 4G era where 6GHz represented the top end of the spectrum!
The sub-6GHz band is not going away, and in fact is critical to the success of 5G serving as the backbone for the majority of networks. Marki Microwave has a large selection of components that cover this band along with wider bandwidths to support harmonic testing.
The 60GHz band, with 14GHz of available bandwidth, is being utilized for a variety of applications including 5G, point-to-point, WiGig (801.11ad, 802.11ay), and industrial sensors for robotics and factory automation. Our wide array of new MMIC products along with our legacy 67GHz passive modules are ideal solutions for all millimeter-wave production and R&D efforts.
AmplifiersBand (GHz)Gain (dB)Psat (dB)Bias28GHz39GHz47GHz60GHz+SMTDieModule
ADM-5931DC-2811187V/-0.25V, 85mA
●
●
ADM-5974DC-3514227V/-0.25V, 160mA
●
●
AMM-670220-5528213.5V/-0.5V, 180mA
●
●
●
●
●
AMM-6702SM20-5024193.5V/-0.5V, 180mA
●
●
●
●
APM-6849/SM2-3011215V/5V, 23mA
●
●
●
●
ADM2-0035PA0.1-3523237V/-0.25V, 320mA
●
●
AMM-719911-3820.5/19213V/-0.5V, 180mA
●
●
●
●
AMM-720012-4618/1621.5/213V/-0.5V, 180mA
●
●
●
●
●
AMM-721022-5714.5/1320.5/213V/-0.5V, 180mA
●
●
●
●
●
●
AMM-720330-6011.5162V/-0.5V, 80mA
●
●
●
●
●
BalunsBand (GHz)Amp Bal (dB)Phase Balance (Degrees)28GHz39GHz47GHz60GHz+SMTDieModule
MBAL-144014-400.21.1
●
●
●
MBAL-1445SM14-450.22
●
●
●
BAL-0036DC-360.53
●
●
BAL-0050DC-500.74
●
●
●
●
BAL-0067DC-670.74
●
●
●
●
●
Bias TeesBand (GHz)DC Current (A)DC Voltage (V)28GHz39GHz47GHz60GHz+SMTDieModule
BT-0035SMG.02-350.530
●
●
BTL-0035SMG.0005-350.530
●
●
BTN-0040DC-400.530
●
●
●
BTN1-0040DC-40150
●
●
●
BTN2-0040DC-40250
●
●
●
BTN-0050DC-500.530
●
●
●
●
BTN1-0050DC-50150
●
●
●
●
BTN2-0050DC-50250
●
●
●
●
BTN-0065DC-650.530
●
●
●
●
●
Couplers,
Stripline Directional		Band (GHz)Coupling (dB)Amplitude Flatness (dB)28GHz39GHz47GHz60GHz+SMTDieModule
C13-01401-4013±1
●
●
●
C20-02402-4020±0.75
●
●
●
C13-01501-5013±0.75
●
●
●
●
C10-04504-5010±0.5
●
●
●
●
C10-06676-6710±0.8
●
●
●
●
●
C16-06676-6716±0.9
●
●
●
●
●
C20-06676-6720±0.8
●
●
●
●
●
Couplers,
Low-Loss High-Power		Band (GHz)Insertion Loss (dB)Power (W)28GHz39GHz47GHz60GHz+SMTDieModule
CA-40DC-400.520
●
●
●
CA-50DC-500.515
●
●
●
●
Positive Slope EqualizersBand (GHz)Low Freq Atten (dB)28GHz39GHz47GHz60GHz+SMTDieModule
MEQ3/6/10-30ADC-303, 6 & 10
●
●
●
●
●
●
MEQ3/6/10-60ADC-603, 6 & 10
●
●
●
●
●
●
MEQ10-50AUDC-5010
●
●
●
●
FiltersBand (GHz)Insertion Loss (dB)Description28GHz39GHz47GHz60GHz+SMTDieModule
MFB-1445SM14-453.75Bandpass Filter
●
●
●
MFB-250018-321.5Bandpass Filter
●
●
MFB-262520.5-321.5Bandpass Filter
●
●
MFB-317525.5-381.5Bandpass Filter
●
●
MFB-330026-401.5Bandpass Filter
●
●
●
MFB-345024-451.5Bandpass Filter
●
●
●
MFB-347529.5-402Bandpass Filter
●
●
MFB-535038-671.2Bandpass Filter
●
●
●
●
MDPX-2330DC-600.8DC-23, 30-60 Diplexer
●
●
●
●
MDPX-2734DC-600.9DC-27, 34-60 Diplexer
●
●
●
●
FLP-32003dB Cutoff Freq: 321.8Lowpass Filter
●
●
FLP-36603dB Cutoff Freq: 36.61.8Lowpass Filter
●
●
FLP-43003dB Cutoff Freq: 432Lowpass Filter
●
●
●
FLP-50003dB Cutoff Freq: 502Lowpass Filter
●
●
●
●
FH-2600Cutoff Freq: 26-Highpass Filter
●
●
●
●
●
FH-4000 Cutoff Freq: 40-Highpass Filter
●
●
●
FH-5500Cutoff Freq: 50-Highpass Filter
●
●
FB-2500Center Freq: 22.5-Bandpass Filter
●
●
FB-2770Center Freq: 27.7-Bandpass Filter
●
●
FB-4000Center Freq: 40-Bandpass Filter
●
●
DPX-9516DC-32-DC-9.5, 16-32
●
●
DPX-1114DC-30-DC-11, 14-30
●
●
DPX-1721DC-40-DC-17, 21.5-40
●
●
●
Quadrature HybridsBand (GHz)Amplitude Balance (dB)Phase Balance (Degrees)28GHz39GHz47GHz60GHz+SMTDieModule
MQH-143414-34±0.7±4.5
●
●
MQH-184218-42±1.5±4
●
●
●
QH-04404-40±0.4±5
●
●
●
QH-05505-50±0.6±5
●
●
●
●
QH-08678-67±0.6±6
●
●
●
●
●
MixersRF/LO (GHz)IF (GHz)IIP3 (dBm)LO Drive (dBm)28GHz39GHz47GHz60GHz+SMTDieModule
MM2-0530L/H/LSM/HSM5-302-20+19/+28+15/+20
●
●
●
●
MM1-0832L/H8-32DC-12+14/+23+9/+15
●
●
●
MM1-0832LSM/HSM8-32DC-12+14/+23+9/+15
●
●
●
MM1-1044L/H10-44DC-14+13/+22+9/+15
●
●
●
MM1-1130HSM11-30DC-12+21+15
●
●
MM1-1140H11-40DC-12+21+15
●
●
●
●
MM1-1240S12-40DC-12+25+20
●
●
●
●
MM1-1453LSM/HSMSM14-53DC-22+13/+17+9/+15
●
●
●
●
MM1-1467L/H14-67DC-21+12/+17.5+13/+15
●
●
●
●
●
●
MM1-1850H/S18-50DC-20+21/+25+15/+20
●
●
●
●
●
MM1-1850HSM/SSM18-50DC-21+17/+28+15/+20
●
●
●
●
MM1-1857L/H18-57DC-21+13/+20+9/+13
●
●
●
●
●
MM1-2567L/LSM25-67DC-30 +9+13
●
●
●
●
●
●
●
IQ MixersRF/LO (GHz)IF (GHz)Image Reject (dBc)L-R Isolation (dB)28GHz39GHz47GHz60GHz+SMTDieModule
MMIQ-1037H10-37DC-122547
●
●
●
MMIQ-1040L/S10-40DC-122547/44
●
●
●
●
MMIQ-1040LSM/HSM10-40DC-103550/40
●
●
●
MMIQ-1865L/H/S18-65DC-233549/48/50
●
●
●
●
●
●
MMIQ-1867LSM/HSM18-67DC-2332/2948.5/44
●
●
●
●
●
MMIQ-4067L40-67DC-203533
●
●
●
●
●
MultipliersInput (GHz)Output (GHz)Description28GHz39GHz47GHz60GHz+SMTDieModule
NLTL-6274SM0.1-10.1-30Harmonic Comb Generator
●
●
NLTL-6276SM0.5-3.50.5-50Harmonic Comb Generator
●
●
●
●
NLTL-6273

0.7-50.7-40Harmonic Comb Generator
●
●
●
●
●
NLTL-62753-153-85Harmonic Comb Generator
●
●
●
●
●
●
MMD-1030H/HSM5-1510-30Passive Doubler
●
●
●
●
ADA-10305-1510-30Active mmWave Doubler
●
●
AQA-21565.25-1421-56Active mmWave Doubler
●
●
●
●
MMD-1648L8-2416-48Passive Doubler
●
●
●
●
●
MMD-2050L/HSM
10-2520-50Passive Doubler
●
●
●
●
ADA-2052

10-2520-52Passive Doubler
●
●
●
●
●
●
MMD-2060LSM/HSM10-2520-50Passive Doubler
●
●
●
●
MMD-2060L/H10-3020-60Passive Doubler
●
●
●
●
●
●
MMD-3567L
17.5-33.535-67Passive Doubler
●
●
●
●
●
MMD-3580L
17.5-4035-80Passive Doubler
●
●
●
●
●
MMD-20100H10-5020-100Passive Doubler
●
●
●
●
●
●
MMQ-40125H10-31.2540-125Passive Quadrupler
●
●
●
●
Power Dividers, Wilkinson 1:2Band (GHz)Amplitude Balance (dB)Phase Balance (Degrees)28GHz39GHz47GHz60GHz+SMTDieModule
PD-0434SM4-34±0.25±3
●
●
PD-0530SMG5-30±0.1±2
●
●
PD-0535SM5-35±0.25±3
●
●
PD-0040DC-40±0.25±2
●
●
●
PD-01401-40±0.2±2
●
●
●
PD-04404-40±0.2±3
●
●
●
PD-01501-50±0.25±3
●
●
●
●
PD-04504-50±0.5±0.5
●
●
●
●
PD-01651-65±0.25±3
●
●
●
●
●
PD-04654-65±0.5±5
●
●
●
●
●
Power Dividers, Wilkinson 1:4Band (GHz)Amplitude Balance (dB)Phase Balance (Degrees)28GHz39GHz47GHz60GHz+SMTDieModule
PD4-01401-40±0.4±4
●
●
●
PD4-01501-50±0.5±5
●
●
●
●
Power Dividers, Resistive 1:2Band (GHz)Amplitude Balance (dB)Phase Balance (Degrees)28GHz39GHz47GHz60GHz+SMTDieModule
PD-0040DC-40±0.25±2
●
●
●
AttenuatorsBand (GHz)Attenuation (dB)Return Loss (dB)28GHz39GHz47GHz60GHz+SMTDieModule
ATN06-0067DC-676.423
●
●
●
●
●
ATN10-0067DC-6710.522
●
●
●
●
●
ATN06-00110DC-1106.520
●
●
●
●
●
ATN10-00110DC-11010.520
●
●
●
●
●
AdaptersBand (GHz)Loss (dB)Description28GHz39GHz47GHz60GHz+SMT DieModule
ADP-2429DC-400.32.4mm to 2.92mm
●
●
●
ADP-29DC-400.32.92mm to 2.92mm
●
●
●
ADP-24DC-500.52.4mm to 2.4mm
●
●
●
●
RA-40DC-400.32.92mm swept radius
●
●
●
RA-50DC-500.32.4mm swept radius
●
●
●
●
DC BlocksBand (GHz)Loss (dB)Description28GHz39GHz47GHz60GHz+SMTDieModule
DCZ2929.000004-400.72.92mm
●
●
●
DCZ2424.000004-500.72.4mm
●
●
●
●
LimitersBand (GHz)Peak Power CW (dBm)Peak Power Pulsed (W)28GHz39GHz47GHz60GHz+SMTDieModule
HLM-40DC-40420
●
●
●
●
HLM-40PSMDC-402.59.5
●
●
●

Space

Space Qualified MMIC Die

• Qualification per MIL-PRF-38534
• Class H and Class K
• 100% Tac Probed and Visually Inspected
• 100% Electrical Test

Request quote & copy of our qual test plan

For years Marki Microwave has been a trusted source for high-volume commercial and rigorous hi-rel applications. We’re proud to now service the space market with in-house space qualification of our GaAs MMIC die. Our qualification test plan is derived straight from MIL-PRF-38534, Appendix C, Table C-II to ensure a consistent process that provides fast quotes, predictable lead times, and high quality results. We include detailed data packets with both our Class H and Class K qualifications. Currently we offer over 70 MMIC products that can be space-qualified, and this list continues to grow. Contact us today for a quote or to request a copy of our qualification test plan.

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.