SMA connectors are compatible with SMA, WSMA, 3.5 mm, 2.92 mm, and Anritsu K-Connectors®. Marki Microwave SMA connectors are useable to 40 GHz. For catalog products, SMA connectors are specified only for ports that function below 26.5 GHz. SMA connectors are durable, suitable for laboratory use.
2.92 mm connectors are compatible with Anritsu K-Connectors®, SMA, WSMA, and 3.5 mm connectors. Mode free to 40 GHz, these connectors are useable to 50 GHz. 2.92 mm connectors need to be carefully aligned to avoid damaging the female receptacle. This makes them less suitable for laboratory use.
2.40 mm connectors are compatible with Anritsu 1.85 mm V-Connectors®. Mode free to 50 GHz, these connectors are useable to 65 GHz. The extended mating contact of the 2.40 mm connector is much less susceptible to alignment damage than the 2.92 mm connector, making the 2.40 mm connector more suitable for laboratory use above 26.5 GHz.
Marki Microwave mixers and other devices are available with any combination of female and male connectors (all female connectors are the default catalog configuration unless otherwise specified on the data sheet). Our 65 GHz models typically have male connectors on the RF or Device Output port. Dash number designators for catalog models are shown below.
MIXER CONNECTOR CONFIGURATION PART DESIGNATORS: |
|||
| DASH NUMBER | LO-PORT | RF-PORT | IF-PORT |
| No Dash | F | F | F |
| -1 | F | F | M |
| -2 | F | M | F |
| -3 | M | F | F |
| -4 | M | M | F |
| -5 | M | F | M |
| -6 | F | M | M |
| -7 | M | M | M |
TWO-PORT DEVICES: |
|||
| DASH NUMBER | INPUT-PORT | OUTPUT-PORT | |
| No Dash | F | F | |
| -1 | F | M | |
| -2 | M | F | |
| -3 | M | M | |
SMA connectors are compatible with SMA, WSMA, 3.5 mm, 2.92 mm, and Anritsu K-Connectors®. Marki Microwave SMA connectors are useable to 40 GHz. For catalog products, SMA connectors are specified only for ports that function below 26.5 GHz. SMA connectors are durable, suitable for laboratory use.
2.92 mm connectors are compatible with Anritsu K-Connectors®, SMA, WSMA, and 3.5 mm connectors. Mode free to 40 GHz, these connectors are useable to 50 GHz. 2.92 mm connectors need to be carefully aligned to avoid damaging the female receptacle. This makes them less suitable for laboratory use.
2.40 mm connectors are compatible with Anritsu 1.85 mm V-Connectors®. Mode free to 50 GHz, these connectors are useable to 65 GHz. The extended mating contact of the 2.40 mm connector is much less susceptible to alignment damage than the 2.92 mm connector, making the 2.40 mm connector more suitable for laboratory use above 26.5 GHz.
Marki Microwave mixers and other devices are available with any combination of female and male connectors (all female connectors are the default catalog configuration unless otherwise specified on the data sheet). Our 65 GHz models typically have male connectors on the RF or Device Output port. Dash number designators for catalog models are shown below.
MIXER CONNECTOR CONFIGURATION PART DESIGNATORS: |
|||
| DASH NUMBER | LO-PORT | RF-PORT | IF-PORT |
| No Dash | F | F | F |
| -1 | F | F | M |
| -2 | F | M | F |
| -3 | M | F | F |
| -4 | M | M | F |
| -5 | M | F | M |
| -6 | F | M | M |
| -7 | M | M | M |
TWO-PORT DEVICES: |
|||
| DASH NUMBER | INPUT-PORT | OUTPUT-PORT | |
| No Dash | F | F | |
| -1 | F | M | |
| -2 | M | F | |
| -3 | M | M | |