2
0

I am currently researching methods to create a frequency doubler, So far I concluded to use a Schottky diode in a rectifier bridge configuration to creat the Fx2 harmonics. Can you guild on the transformer that is best for this purpose, and also the diode best to use.

5 Mhz to 10 MHz, unity power gain

  • You must to post comments
0
0

Rany,

For frequencies that low, the balun options would be the BALH-0003SMG or BAL-0003SMG. These are also available as connectorized units, although I don’t think that would be compatible with your packaging requirements. These baluns will provide the best possible suppression of the fundamental, third, and other odd harmonics. You will need to add an amplifier to counteract the loss in the baluns and diode quad.

Another option is to use a flux coupled balun from another company, if your primary concern is with loss and not harmonic suppression.

  • You must to post comments
Showing 1 result
Your Answer

Please first to submit.

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.