0
0

Hello Marki,

We are using DLM-10SM Limiter in our Design. In order to set Limiting threshold we need to bias the diode.

So we need to know, what is the current requirement at +DC Bias CH1 and -DC Bias CH1 .

Please let us know the detail soon.

 

  • Doug Jorgesen
    There shouldn’t be much of a bias current. The diodes in the limiter are reverse biased, so all that is needed is the reverse bias leakage current.
  • You must to post comments
Showing 0 results
Your Answer

Please first to submit.

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.