we are using M2-0218, MT3-0113LCQG, M1-0310 mixers for various frequency of applications please provide us ADS or AWR models
- Our Nonlinear Device Models for Microwave Office and ADS are available here: https://www.markimicrowave.com/engineering/resources/non-linear-device-models/ However, the devices you listed (M2-0218, MT3-0113LCQG, and M1-0310) do NOT have models available for them. All M1, M2, M4, M8, and M9 mixers are considered ‘Legacy’ mixers. These hybrid mixers are built using three dimensional constructions from low dielectric softboard, discrete diodes, and ferrite by hand. While they have some attractive features (most importantly low loss across broad bandwidths) they are typically not preferred because they are less repeatable, have poorer isolations and spurious performance, and are more expensive to produce (especially in volume). Because they are not very repeatable and because they are a hybrid construction it is not possible to create accurate models for them. The MT3-0113LCQG is also a hybrid assembly, but it uses some handbuilt components combined with a monolithic mixer core. While it is much more repeatable and high performance (and is therefore frequently recommended for designs) it is also not very amenable to the creation of physics based nonlinear models.
- You must login to post comments