<style type="text/css"> .wpb_animate_when_almost_visible { opacity: 1; }</style>

Unless otherwise specified, electrical specifications apply at TA=+25°C, Vd1,Vd2,Vg1,Vg2 = 5 V. Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C

Parameter

Test Conditions

Frequency

Min

Typical

Units

Saturated Output Power

Vd1, Vd2, Vg1,

Vg2 = 5 V

2 GHz – 27 GHz

 

+22

dBm

27 GHz – 40 GHz

 

+20

dBm

Small Signal Gain

Vd1, Vd2, Vg1,

Vg2 = 5 V

Pin = -20 dBm

 

2 GHz – 40 GHz

 

22

dB

Input Return Loss

 

15

Output Return Loss

 

15

Reverse Isolation

 

55

Noise Figure

 

3.3

Input IP3

Vd1, Vd2, Vg1,

Vg2 = 5 V

Pin = -24 dBm per tone, 1 MHz tone spacing

2 GHz – 20 GHz

 

+9

dBm

20 GHz – 40 GHz

 

+5

Output IP3

2 GHz – 20 GHz

 

+30

20 GHz – 40 GHz

 

+25

Output IP2

2 GHz – 12 GHz

 

+45

12 GHz – 22 GHz

 

+37

Output P1dB

Vd1, Vd2, Vg1,

Vg2 = 5 V

2 GHz – 40 GHz

 

+21

Input Power for Saturation

2 GHz – 27 GHz

 

+2

27 GHz – 40 GHz

 

+0

DC Supply

Quiescent Current (Idq)

(Drain + Bias Current)

Vd1, Vd2, Vg1,

Vg2 = 5 V

no RF input

 

 

232

mA

Download our 3D models here.
ADM1-8007PC Amplifier Package Diagram

The ADM1-8007PC is a high-linearity, high gain, low noise distributed amplifier capable of providing +20dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, the ADM1-8007PC can provide sufficient LO drive to power all H and most S diode mixers to 40GHz. The amplifier has excellent return losses and gain flatness.

The ADM-8007PC is the ideal LO driver. For measured data of each and every Marki mixer with the ADM-8007 click here.

ModelPackageOrder
ADM1-8007PCConnectorized (PC, 2.92mm Female Connector, 2.92mm Male Connector)Buy Now


Did you know we offer high-performance Adapters, Attenuators, DC Blocks, and Power Limiters?

START TYPING AND PRESS ENTER TO SEARCH FOR MARKI PRODUCTS.