Marki Microwave, Inc.215 Vineyard CourtMorgan Hill, CA 95037P 408.778.4200F 408.778.4300info@markimicrowave.com
Please contact customer service by phone or via e-mail regarding the following:
Related Links
What is the practical difference between a double balanced mixer and a triple balanced mixer?
Why are there so many diode types to choose from? How do I know what diode-type I should select?
I have the design choice to either have a high LO drive (around +20dBm) or a low LO drive (around +10 dBm) for my mixer. What should I choose?
Why do higher barrier diodes have better intermodulation distortion suppression as compared to low barrier diodes?
Which mixers have the best intermodulation distortion suppression?
What is a square-wave LO driver amplifier and when should I use it?
What is the 1 dB compression point?
How can I improve the 1 dB compression point?
Can I improve the 1 dB compression point by increasing the LO drive level?
Which mixers have the best isolation performance?
You don’t specify VSWR on your datasheets. What is the typical VSWR for your mixers?
I bought one of you mixers and the conversion loss has a very bad amplitude ripple on the order of +/- a few dB. Is the mixer damaged?
I can't find the datasheet to an older Marki mixer on the Marki Microwave website. Is this product no longer offered?
What is the difference between the image rejection mixer IRW-0618 and the single sideband mixer SSB-0618?
Are the LO and RF ports of a mixer physically interchangeable? Can I drive my LO signal into the RF port and my RF signal into the LO port?
Does Marki Microwave offer surface mount components?
Does Marki Microwave offer hermetic packaging?
What connectors come with your connectorized packages?
What is a Wavefade low pass filter?
Do you offer surface mount microwave filters?
What happens when I do not drive the mixer LO with enough RF power?
site map
product search
basic search: