DATA SHEET NOTES

1. Mixer Conversion Loss Plots are done with an IF frequency of 100 MHz unless otherwise specified.

2. Mixer Noise Figure typically measures within +0.5 dB of conversion loss for IF frequencies greater than 5 MHz.

3. Conversion Loss typically degrades less than 0.5 dB for LO drives 2 dB below the lowest nominal and 3 dB above highest nominal LO drive levels.

4. Conversion Loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C.

5. Maximum Input power without damage for M2, T3, IQ, and IR style mixers is +26 dBm at +25°C, derated linearly to +23 dBm at +100°C.  Maximum input power for all other mixers and doublers is +23 dBm at +25°C, derated linearly to +20 dBm at +100°C.

6. Specifications are subject to change without notice. Contact Marki Microwave for the most recent specifications and data sheets.

7. Standard configuration for A, B, and C outlines is with connectors and bottom spacer.

8. Catalog mixer circuits are continually improved. If configuration control is required, a custom mixer model number and specifications will be assigned.